Mywud BWR - Technical Specification

Sonear BWR Plywood is bonded with high Quality Phenol Formaldehyde Resin. It undergoes a chemical impregnation treatment under high temperature and pressure. The result is a high quality ply that can resist boiling water, cold water, climate variations, powder and termite attacks. It does not delaminate even when immersed in boiling water for more than eight hours. It is ideal for use in hot, humid and moist locations.

Areas of Application
Ideal for exterior and interior applications, like furniture and fixtures, woodwork in kitchens and bathrooms, partitions, door panels & inserts.

Testing Parameters I.S. : 303 Requirement Sonear Ltw Gold Results
Moisture Content 5%-15% 7.7%
Glue Adhesion test Three test specimen of size
250mmx100mm.shall be prepared and submerged in boiling water for eight hours and then dryed for sixteen hours at temperature of 65+2c° followed by two more cycles and then tested as per IS:1734 (parts 5)
3 Cycles carried out no delamination observed.
Excellent Bonding
Modulus of Rupture Across the Grain Average 20 N/mm2 22 N/mm2
Modulus of Elasticity Across the Grains Average 2500 N/mm2 2700 N/mm2